clamped. � Compound Rest: Mounted to the cross slide, it pivots around the tool post. � Apron: Attached to the front of the carriage, it has the mechanism and controls for moving the carriage and cross slide. � Feed Rod: Has a Morse taper to hold a lathe center, drill bit or other tool. � Carriage: Moves on the outer ways.
Used for mounting and moving most the cutting tools. � Cross Slide: Mounted on the inner ways of the carriage, and uses a handwheel to feed tools into the workpiece. � Tool Post: To mount tool holders in which the cutting bits are clamped. � Compound Rest: Mounted to the cross slide, it pivots around the tool post.
� Apron: Attached to the front of the carriage, it has the mechanism and controls for moving the carriage and cross slide. � Feed Rod: Has a Morse taper to hold a lathe center, drill bit or other tool. � Carriage: Moves on the outer ways. Used for mounting and moving most the cutting tools. � Cross Slide: Mounted on the traverse slide of the carriage using levers.
� Spindle: Hole through the headstock to which bar stock can be fed, which allows shafts that are up to 2 times the length between lathe centers to be worked on one end at a time. � Chuck: 3-jaw (self centering) or 4-jaw (independent) to clamp part being machined. � Chuck: allows the mounting of difficult workpieces that are not round, square or triangular.
� Tailstock: Fits on the traverse slide of the bed and can slide towards any position the headstock to which bar stock can be fed, which allows shafts that are up to 2 times the length between lathe centers to be worked on one end at a time. � Chuck: 3-jaw (self centering) or 4-jaw (independent) to clamp part being machined.
� Chuck: allows the mounting of difficult workpieces that are not round, square or triangular. � Tailstock: Fits on the inner ways of the bed and can slide towards any position the headstock to fit the